industry Powerline bridge work with SIEMENS

• Customization: Available
• Standard: G.Hn
• OEM: Accepted
• Model NO.: WD-1001M-DIN(HV3)
• Usage: Industry
• Performance: Poweline
• Bandwidth: 1000Mbps
• Frequency: 2-100MHz
• Transport Package: Paper Carton
• Specification: 120*89*44mm
• Trademark: Wondertek
• Origin: China
• HS Code: 85176990
• Production Capacity: 5000/Month

Product Description

Industrial Powerline Ethernet Bridge
Wide Voltage(150V-630V) 

WD-1001M-DIN(HV3)
Overview  

WD-1001M-DIN(HV3) industrial powerline ethernet bridge is an industrial powerline communication product developed by Kunshan Wondertek Technology Co., Ltd. The product adopts the ITU-T G.9960 G.hn communication protocol standard, has been widely used in intelligent manufacturing, intelligent building, intelligent city street lamp, intelligent electricity meter, solar panel monitoring, communication in dangerous environment, maritime applications, automotive applications, aerospace applications, railway, mining, intelligent storage, intelligent sorting, Automatic garage and other wired or sliding contact line and many other sites.
                      

Product Features

Packet loss:≤0.1%(100M,load 70%) 
Support 7*24 hours all weather operation;
Hardware watch dog function;
Low delay communication 
Wide voltage input
NDIM (Near Field Interference)
 

Product Technical Characteristics

3.1 Technical parameters            

1. support G.hn protocol standard.
2. Industrial DIN standard installation or fixed installation method.
3. rate adaptive.

3.2 Administrative

1. Remote Firmware Update (TR069).
2. 802.3D Ethernet Bridge.
3. 802.1Q VLAN.
4. Quality of Service(QoS) .
5. IGMO(IPv4)Snooping&MLD(IPv6)Snooping

3.3 The work environment

1. The working temperature of the working environment is -40ºC-85ºC.
2. Operating environment Operating temperature :10%-85% non-condensing state Preservation humidity 5%-90% non-condensing state.

3.4 Design criteria

1.  ITU-T G.9960
2.  IEC 60529
3.  IEC 50022
4.  IEC 60068-2-6   

3.5 Specification

Interface	1*LAN 10/100/1000Base-TX self Adaption RJ45,MDI/MDX
Operating voltage range	AC150-630V/DC200-890V
LED display Light	Ethernet   PLC   Power
Transfer frequency	2-50MHz and MIMO
Protocol(PHY)	ITU-T G.9960 (G.hn) IEEE802.3,IEEE802.3x, IEEE802.3u
Security	128-AES
Transfer rate(PHY)	1000Mbps
Number of each Group	7
Modulation	OFDM
Effective transfer rate	TCP/IP  500Mbps
Manageability	Remote Firmware update,support TR-069(optional)
	802.1D Ethernet Bridge
	802.1Q VLAN
	Quality of Service(QoS)
Operating temperature	-40ºC-85ºC
Weight	About 0.30kg
Operating environment	Operating humidity:10%-85%(no condense)       Storage humidity: 5%-90% (no condense)
Certification	FCC,CE class B,WEEE,RoHS
Transmission distance	800m  Max
Transmission lines	Three-wire transmission  MIMO Mode

3.6 Immunity Of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s.
According to B/T 17626.2-2006.


3.7 Immunity of Electrical Fast Transient Impulse Group(Common mode)
The testing voltage which the device should be beared:
Between the power supply voltage port and ground: ±2.0kV;
Between signal circuit and ground: ±1.0kV;
Repetition frequency: 5KHz;
Test duration: 1 min/ time;
Testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
3.8 Anti Interference of Surge Impact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
3.9 Anti- Vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.

4. Connection Topology Diagram


5. Mounting Dimension Drawing