Powerline products -Data Transmission Systems for PLC

• Customization: Available
• Standard: G.Hn
• OEM: Accepted
• Model NO.: WD-1001M-DIN
• Usage: Industry
• Performance: Poweline
• Bandwidth: 1000Mbps
• Frequency: 2-100MHz
• Transport Package: Paper Carton
• Specification: 120*89*44mm
• Trademark: Wondertek
• Origin: China
• HS Code: 85176990
• Production Capacity: 5000/Month

Product Description

Industrial Powerline Ethernet Bridge
                     Model: WD-1001M-DIN(S/T4/V3/D)

Industrial scenarios, Recommended to use with blocking Filter     
                     

Product overview
DIN rail mounting industrial powerline ethernet bridge is an industrial power line communication product developed by Kunshan Wondertek Technology Co., LTD. The product supports the G.hn communication protocol standard. At present, it has been widely used in railway, mining, industrial communication, airport, subway, coal mine, intelligent storage, industrial automation control, automatic garage and other wired or sliding contact line and many other sites.

1. 1. Features
      1. Technical parameters             
2. Support G.hn Protocol standard
3. Industrial DIN rail style installation
4. The maximum transfer distance up to 500 meters.
5. Self-adapt the rate

1.1.2 Manageability

1. 802.3D Ethernet Bridge.
2. 802.1Q VLAN.
3. Quality of Service(QoS) .
4. IGMO(IPv4)Snooping&MLD(IPv6)Snooping

1.1.3 Work environment

1. Working temperature:   -40ºC-80ºC.
2. Operating humidity: 10%-85% no condense. l
3. Storage humidity:5%-90% no condense

1.1.4 Design standard
                 IEC 60529                   IEC 50022
                 IEC 60068-2-6               MIL-STD-810G
                 G.hn
 

Specification:

Model	WD-1001M-DIN
Interface	1*LAN 10/100/1000Base-TX self adaption RJ45,1*power interface MDI/MDX support
LED display light	Ethernet PLC Power
Transfer frequency	2-100MHz
Protocol(PHY)	IEEE802.3,IEEE802.3x, IEEE802.3u   G.hn
Security	128-AES
Transfer rate(PHY)	1000Mbps
Number of each group	8
Modulation	OFDM
Effective transfer rate	TCP/IP    530Mbps
	802.1D Ethernet Bridge
	802.1Q VLAN
	Quality of Service(QoS)
Operating temperature	-40ºC-80ºC
Size	120*90*45mm(L×W×H)
Voltage range	AC85-520V   DC9-700V
Weight	About 0.30kg
Operating environment	Operating humidity:10%-85% (no condense) Storage humidity: 5%-90%(no condense)
Certification	FCC,CE class B,WEEE,RoHS

1.2 Features
(1) Packet loss:≤0.1%(100M,load 70%).
(2) Support 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤20MS.

1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.

1.4 Immunity of electrical fast transient impulse group(Common
mode)
The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz, test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.

1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of
discharge tube type)

1.6 Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test

1.7  System Topology
 1,Control computer 2, switch or router 3, WD-1001M-DIN 4, conductor rail/cable 5, peripheral equipment 6, power carrier special isolator 7, load
1.8  System Architecture Diagram
Model: WD-1001M-DIN(S) AC85-520V   L(Phase line)
Model: WD-1001M-DIN(T4) AC85-520V  (ABC phase line)
Model: WD-1001M-DIN(V3) AC85-520V  (A/B/C phase line)

Model: WD-1001M-DIN(D)    9-700V DC

1.9 Reference for selection of PLC -Blocking -Filter
According to the voltage specification (single phase, three phase, DC) and power (current) of the field load, consult the sales for the power carrier isolator parameters.


2.0  Site selection reference
Field single phase: WD-1001M-DIN(S)
Field three-phase: WD-1001M-DIN(V3)
Field DC: WD-1001M-DIN(D)
Field front-end three-phase +N/ back-end single-phase+N:
Front end with WD-1001M-DIN (T4)
The backend with WD-1001M-DIN (S)   


2.1. Installation: