DIN Rail PLC Ethernet Bridge work with Siemens S7-1500

• Customization: Available
• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Laptop
• Type: Wired
• Model NO.: WD-2001M-DIN
• Support Network: Ethernet
• Information content: Data
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Transport Package: Paper Carton
• Specification: 0.25KG
• Trademark: OEM
• Origin: China
• HS Code: 8517699000
• Production Capacity: 5000/Mouth

Product Description

Brief introduction 
               Industrial Powerline Ethernet Bridge

                                                   Model: WD-2001M-DIN-P(V3)

 

Product overview
DIN rail mounting industrial powerline ethernet bridge is an industrial power line communication product developed by Kunshan Wondertek Technology Co., LTD. The product supports the G.hn communication protocol standard. At present, it has been widely used in railway, mining, industrial communication, airport, subway, coal mine, intelligent storage, industrial automation control, automatic garage and other wired or sliding contact line and many other sites.

1. 1. Features

1.1.1 Technical parameters             

1. Support G.hn Protocol standard
2. Industrial DIN rail style installation
3. The maximum transfer distance up to 500 meters.
4. Self-adapt the rate

1.1.2 Manageability

1. 802.3D Ethernet Bridge.
2. Quality of Service(QoS) .
3. IGMO(IPv4)Snooping&MLD(IPv6)Snooping

1.1.3 Working environment

1. Working temperature:  -40ºC-80ºC.
2. Operating humidity: 10%-85% no condense. l
3. Storage humidity:5%-90% no condense

1.1.4 Design standards
           IEC 60529       IEC 50022     IEC 60068-2-6    G.hn
 

1.1.5 Technical parameters

Model	WD-2001M-DIN(V3)
Interface	1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface
LED display light	Ethernet, PLC ,Power
Transfer frequency	2-50MHz  MIMO (based on G.9963)
Protocol(PHY)	IEEE802.3,IEEE802.3x, IEEE802.3u   G.hn
Security	128-AES
Number of each group	Up to 8
installation	Rail TS35
Protection level	IP40
Modulation	OFDM
Effective transfer rate	TCP/IP  600Mbps
Manageability	802.1D Ethernet Bridge
	Quality of Service(QoS)
	IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Voltage range	AC 90V-530V 50/60Hz /DC100-700V /80mA
Operating temperature	-40ºC-80ºC
Size	123*97*47(mm)(L×W×H)
Weight	0.25kg
Operating environment	Operating humidity:10%-85% (no condense)
	Storage humidity: 5%-90%(no condense)
Certification	FCC,CE class B, RoHS

1.2 Features
(1) Packet loss:≤0.1%(100M,load 70%).
(2) Support 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤20MS.
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common
mode)
The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz, test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of
discharge tube type)
1.6 Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test

4. Connection topology diagram
On-site power environment: L N G  
L Connect terminal B,  N Connect terminal C,
G Connect terminal A




On-site power environment: L1 L2 L3 three-phase  
L1 Connect terminal B,  L2 Connect terminal C,
L3 Connect terminal A




5.  Reference for selection of PLC -Blocking -Filter

Model	WD302 series
The rated voltage	380/440V AC
Working frequency	50/60Hz
Rated current	10-250A
Withstand voltage test	1450VDC, 2sec (Line to Line) 2250VDC, 2sec(Line to Ground)
Leakage current	90mA Max
Climate type	-25ºCto+85ºC
The standard reference	UL1283,CSA22.2 No.8 1996,IEC/EN60939
Protection grade	IP40

Model	Rated Current(A)	Leakage Current(≤10mA)	Dim.Fig	Screw
WD302-10A-01	10	10	N2	M4
WD302-20A-01	20	20	N2	M4
WD302-30A-01	30	20	N5	M6
WD302-40A-01	40	20	N5	M6
WD302-50A-01	50	30	N10	M6
WD302-65A-01	65	30	N10	M6
WD302-80A-01	80	40	N10	M8
WD302-100A-01	100	40	N12	M8
WD302-120A-01	120	40	N12	M8
WD302-150A-01	150	60	N12	M10
WD302-200A-01	200	60	N12	M10
WD302-250A-01	250	60	N15	M10

6.The installation of PLC-Blocking Filter

All loads are installed on the Filter's Load  side.
Do not connect them backwards.    

 
7.System architecture drawing and field wiring




1,Control computer  2, switch or router  3, WD-2001M-DIN-P-(V3)  4, conductor rail/cable  5, peripheral equipment  6, PLC-blocking filter 7, load