Powerline Ethernet bridge matching with Siemens PLC

• Customization: Available
• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Laptop
• Type: Wired
• Model NO.: WD-1001M-DIN(D)
• Support Network: Ethernet
• Information content: Data
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Transport Package: Paper Carton
• Specification: 0.25KG
• Trademark: OEM
• Origin: China
• HS Code: 8517699000
• Production Capacity: 5000/Mouth

Product Description

Brief introduction 
               Industrial Powerline Ethernet Bridge

                                                   Model: WD-1001M-DIN(D)



1.Product overview
DIN rail mounting industrial powerline ethernet bridge is an industrial power line communication product developed by Kunshan Wondertek Technology Co., LTD. The product supports the G.hn communication protocol standard. At present, it has been widely used in railway, mining, industrial communication, airport, subway, coal mine, intelligent storage, industrial automation control, automatic garage and other wired or sliding contact line and many other sites.

                      

2.Product features

  Packet loss:≤0.1%(100M,load 70%) 
  Support 7*24 hours all weather operation;
  Hardware watch dog function;
  Low delay communication
  Wide voltage input
  NDIM (Near Field Interference)

3.Product technical characteristics
3.1 Technical parameters            

1. support G.hn protocol standard.
2. Industrial DIN standard installation or fixed installation method.
3. rate adaptive.

3.2 Administrative

1. Remote Firmware Update (TR069).
2. 802.3D Ethernet Bridge.
3. 802.1Q VLAN.
4. Quality of Service(QoS) .
5. IGMO(IPv4)Snooping&MLD(IPv6)Snooping

3.3 The work environment
 

    The working temperature of the working environment is -40ºC-85ºC.

     Operating environment Operating temperature :10%-85% non-condensing state Preservation humidity 5%-90% non-condensing state.

3.4 Design criteria

1.  ITU-T G.9960
2.  IEC 60529
3.  IEC 50022
4.  IEC 60068-2-6   

3.5 Specification

Model	WD-1001M-DIN-(D)
Interface	1*LAN 10/100/1000Base-TX self adaption RJ45,1*DC power interface
LED display light	Ethernet, PLC link ,Power
Transfer frequency	2-50MHz  MIMO (based on G.9963)
Protocol(PHY)	IEEE802.3,IEEE802.3x, IEEE802.3u   G.hn
Security	128-AES
Number of each group	Up to 8
installation	Rail TS35
Protection level	IP40
Transfer rate(PHY)	1000Mbps
Modulation	OFDM
Effective transfer rate	TCP/IP  530Mbps
Manageability	802.1D Ethernet Bridge
	Quality of Service(QoS)
	IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Voltage range	DC 10V-80V
Operating temperature	-40ºC-80ºC
Size	123*97*47(mm)(L×W×H)
Weight	0.25kg
Operating environment	Operating humidity:10%-85% (no condense)
	Storage humidity: 5%-90%(no condense)
Certification	FCC,CE class B, RoHS

3.6 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s.
According to B/T 17626.2-2006.


3.7Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared:
Between the power supply voltage port and ground: ±2.0kV;
Between signal circuit and ground: ±1.0kV;
Repetition frequency: 5KHz;
Test duration: 1 min/ time;
Testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.

3.8 Anti interference of surge impact

The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)

3.9 Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.

4. Connection topology diagram

On-site power environment: DC+  DC-  G




5.  Reference for selection of PLC -Blocking -Filter
 

Model	WD204series
The rated voltage	125/250VAC
Working frequency	50/60Hz
Rated current	10-200A
Withstand voltage test	1450VDC, 2sec (Line to Line)  2250VDC, 2sec(Line to Ground)
Leakage current	90mA Max
Climate type	-25ºCto+85ºC
The standard reference	UL1283,CSA22.2 No.8 1996,IEC/EN60939
Protection grade	IP40

 

Model	(A) Rated Current	(≤mA) Leakage Current	Dim. Fig.	Output Connection
WD204-10A-01	10	0.5	H1
WD204-20A-01	20	0.5	H1			M4
WD204-30A-01	30	0.5	H2			M4
WD204-40A-01	40	0.5	H2			M4
WD204-50A-01	50	0.5	H2			M4
WD204-60A-01	60	0.5	H2	-	-	M6
WD204-75A-01	75	0.5	N5	-	-	M8
WD204-100A-01	100	0.5	N5	-	-	M8
WD204-120A-01	120	0.5	N5	-	-	M8
WD204-50A-01	150	0.5	N10	-	-	M10
WD204-200A-01	200	0.5	N10	-	-	M10

6.The installation of PLC-Blocking Filter
All loads are installed on the Filter's Load  side.
Do not connect them backwards.    

 
7.System architecture drawing and field wiring




1,Control computer  2, switch or router  3, WD-1001M-DIN(D)  4, conductor rail/cable  5, peripheral equipment  6, PLC-blocking filter 7, load