Easy to Intall Industrial Ethernet Powerline Bridge work with Simon PLC switch

• Customization: Available
• Standard: G.Hn
• OEM: Accepted
• Model NO.: WD-1001M-DIN
• Usage: Industry
• Performance: Poweline
• Bandwidth: 1000Mbps
• Frequency: 2-100MHz
• Transport Package: Paper Carton
• Specification: 120*89*44mm
• Trademark: Wondertek
• Origin: China
• HS Code: 85176990
• Production Capacity: 5000/Month

Product Description

Product Description

Product Specifications

Brief introduction
DIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..

1. Technical parameters             
2. Support G.hn.
3. Industrial DIN rail style installation
4. Actual bandwidth up to 400Mbps
5. The maximum transfer distance up to 1000 meters
6. Self-adapt the rate
7. Compatible with all G.hn devices
8. One Domain Master can manage 15pcs End Point.
9. There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit

1.1.2 Manageability

1. Support Remote Firmware update(TR069)
2. 802.3D Ethernet Bridge.
3. 802.1Q VLAN.
4. Quality of Service(QoS) .
5. IGMO(IPv4)Snooping&MLD(IPv6)Snooping
6. Support local web management

1.1.3Operating environment
 

1. Working temperature:  -40ºC-80ºC.
2. Operating humidity: 10%-85% no condense
3.  Storage humidity:5%-90% no condense

1.1.4 Design standards

1. ITU-T G.9960
2. IEC 60529
3. IEC 50022
4. IEC 60068-2-6
5. MIL-STD-810G

 

Model	WD-1001M-DIN(T/V)	WD-1001M-DIN(D)
Interface	1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface MDI/MDX support	1*LAN 10/100/1000Base-TX self adaption RJ45,1*DC power interface MDI/MDX  support
LED display light	Ethernet, PLC link ,power
Transfer band	25,50 and 100MHz and MIMO (based on G.9963)
Protocol(PHY)	IEEE802.3,IEEE802.3x, IEEE802.3u   G.Hn
Security	128-AES
Transfer rate(PHY)	800Mbps
Modulation	OFDM
Effective transfer rate	TCP/IP  400Mbps
Manageability	Remote Firmware update,support TR-069(optional)
	802.1D Ethernet Bridge
	802.1Q VLAN
	Quality of Service(QoS)
	IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Working voltage	AC 90V-520V		18-75VDC 100V-700VDC
Operating temperature	-40ºC-80ºC
Size	120*89*44 (mm)(L×W×H)(not include installation hook)
Weight	0.35kg		0.30kg
Operating environment	Operating humidity:10%-85% (no condense)
	Storage humidity: 5%-90%(no condense)
Certification	FCC,CE class B,WEEE,RoHS

1.2 Features
Packet loss:≤0.1%(100M,load 70%) 
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.