WD-2001M-DIN for Industrial stacker communications

• Customization: Available
• Communication Mode: Ethernet
• Transmission Rate: 2000Mbps
• Model NO.: WD-2001M-DIN(V3/S/D)
• Ports: ≧48
• Transport Package: Carton
• Specification: 58*120*160mm(LxWxH)
• Trademark: Wondertek
• Origin: China
• HS Code: 8517699000
• Production Capacity: 50000PCS/Year

Product Description

WD-2001M-DIN(V3/S/D)
Brief introduction
DIN rail mounting industrial powerline ethernet bridge is an industrial power line communication product developed by Kunshan Wondertek Technology Co., LTD. The product supports the G.hn communication protocol standard. At present, it has been widely used in railway, mining, industrial communication, airport, subway, coal mine, intelligent storage, industrial automation control, automatic garage and other wired or sliding contact line and many other sites.


1.1 Highlight
1.1.1 Technical parameters            

1. Support G.hn.
2. Industrial DIN rail style installation.
3. Actual bandwidth up to 600Mbps.
4. The maximum transfer distance up to 800 meters.
5. Self-adapt the rate.
6. One Domain Master can manage 127pcs End Point.

1.1.2 Manageability

1. Support Remote Firmware update(TR069).
2. 802.3D Ethernet Bridge.
3. 802.1Q VLAN.
4. Quality of Service(QoS) .
5. IGMO(IPv4)Snooping&MLD(IPv6)Snooping.

1.1.3Operating environment

1. Working temperature:  -40ºC-85ºC.
2. Operating humidity: 10%-85% no condense.
3. Storage humidity:5%-90% no condense.  

1.1.4 Design standards
     IEC 60529                   IEC 50022
     IEC 60068-2-6                MIL-STD-810G
     G.hn

 





 

Model	WD-2001M-DIN(V3/S/D)
Interface	1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface
LED display light	Ethernet, PLC ,Power
Transfer frequency	2-50MHz  MIMO (based on G.9963)
Protocol(PHY)	IEEE802.3,IEEE802.3x, IEEE802.3u   G.hn
Security	128-AES
Number of each group	Up to 8
installation	Rail TS35
Protection level	IP40
Transfer rate(PHY)	2000Mbps
Modulation	OFDM
Effective transfer rate	TCP/IP  600Mbps
Manageability	802.1D Ethernet Bridge
	Quality of Service(QoS)
	IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Voltage range	AC 90V-530V  /DC10-80V
Operating temperature	-40ºC-80ºC
Size	123*97*47(mm)(L×W×H)

1.2 Features
(1) Packet loss:≤0.1%(100M,load 70%).
(2) Support 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤2MS.

1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge.
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each,
Every time the discharge interval is 1 s, according to B/T 17626.2-2006.

1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV; 
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz, test duration: 1 min/ time; 
testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.

1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV; 
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)

1.6 Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.

1.7 System Topology
Model: WD-1201M-DIN(V3)

Model: WD-1201M-DIN(S)

Model: WD-1201M-DIN(D)