| Customization: | Available |
|---|---|
| Usage: | Telephone, Computer, Workstation, Server, Mobile phone, Laptop, Industrial |
| Type: | Wireless |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Industrial PLC Bridge With Wi-Fi is developed by WonderTek Technology (KunShan) Co.,LTD., it supports the HomePlug and 802.11ac and It Can be used in one phase or 3 phases ,and DC or AC condition .The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..
1.1 Highlight
Technical parameters
Support HomePlug and 802.11ac.
Industrial IP67 style installation
The maximum transfer distance up to 800 meters
Self-adapt the rate
1.1.2 Manageability
Support Remote Firmware update(TR069)
802.3D Ethernet Bridge.
802.1Q VLAN.
Quality of Service(QoS) .
IGMO(IPv4)Snooping&MLD(IPv6)Snooping
1.1.3Operating environment
Working temperature: -40ºC-85ºC.
Operating humidity: 10%-85% no condense
Storage humidity:5%-90% no condense
1.1.4 Design standards
HomePlug
IEC 60529
IEC 50022
IEC 60068-2-6
802.11ac
|
Model |
WD-F1200MH-G30 |
|
Interface |
2*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface MDI/MDX support |
|
LED display light |
Ethernet, PLC link ,Power ,Wi-Fi |
|
Transfer band |
2-68MHz |
|
Protocol(PHY) |
IEEE802.3,IEEE802.3x, IEEE802.3u HomePlug 802.11ac |
|
Security |
128-AES |
|
Transfer rate(PHY) |
1200Mbps |
|
Modulation |
OFDM |
|
Manageability |
Remote Firmware update,support TR-069(optional) |
|
802.1D Ethernet Bridge |
|
|
802.1Q VLAN |
|
|
Quality of Service(QoS) |
|
|
IGMO(IPv4)Snooping&MLD(IPv6)Snooping |
|
|
Working voltage |
AC 90V-520V |
|
Operating temperature |
-40ºC-85ºC |
|
Size |
220*160*100mm(L×W×H) |
|
Weight |
1.15kg |
|
Operating environment |
Operating humidity:10%-85% (no condense) |
|
Storage humidity: 5%-90%(no condense) |
|
|
Certification |
FCC,CE class B,WEEE,RoHS |
1.2 Features
Packet loss:≤0.1%(100M,load 70%)
Support 7*24 hours all weather operation
WDT hardware watch dog function
2*1000M Ethernet Port
Gateway ,Bridge,WIFI Client Model
Support: RS485,232 and Baud rate :115200bps
WIFI MESH
Built-in WIFI PA,MSTXPWR :26dbm
External dual band high gain antenna :5dbi
WIFI WPS
Support external antenna,with SMA connector
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
1.7 System topology
){kind=link}